HELIOS LED Processing Technology
Breakthroughs in LED Processing Performance
As direct-view LED pixel pitches get finer, a moderately sized display can quickly go beyond 4K/UHD resolution. While image resolution is important, other image quality differentiators such as dynamic range, contrast ratio, frame rate, bit depth, and color gamut are equally important to image quality. The processing system that is used to drive direct-view LED displays must be equipped with the right features to address and support these important elements beyond simply lighting up the pixels.
With this in mind, what can be done at a processing level to maximize the output performance of the latest LED technologies? In the next few sections of this whitepaper, you will see a series of photographs of actual LED screens performing side-by-side. The images will demonstrate how superior processing results in optimal visual performance, especially in the near-black portion of the grayscale range. All of these displays are of the same model number and production batch for a fair and proper performance comparison.
Components of Near-Black Video Performance
This whitepaper will focus primarily on the near-black region of Megapixel’s HELIOS LED Processing Platform. There are three major attributes that contribute to processing quality in this video region:
- Grayscale bit-depth
- Gradient smoothness
- Gamma tracking
Grayscale bit-depth and gamma tracking are technical software and hardware performance features that make a display objectively better — these elements can be measured and graphed for accuracy. Gradient smoothness, on the other hand, is often content-related and upstream of a display, yet this attribute can also be improved upon via processing algorithms. Viewers often incorrectly interchange the terms “grayscale” and “gradient” performance, however they are not the same, as will be demonstrated in the subsequent sections. Note: Grayscale is a range of monochromatic shades from black to white. Poor gradient smoothness, or banding, can manifest as visible stripes within a gradation of shades of color.
Grayscale bit-depth dictates the number of steps that a display can produce within a range of 0-100%. In the case of an LED display, 0% is “off.” The most vital metric is the lowest threshold at which an LED actually illuminates. The sooner an LED lights up within a low-end ramp, the better the performance and image quality, especially for HDR content with details in the shadows. In the above photos, an observer can see that the light output of the left tile falls off to black much sooner than the right tile. The right tile running on HELIOS retains video information displaying closer to black, thus objectively showing that the display is yielding a better bit-depth performance than the traditional processing in the left tile.
Fill in the form below to download the full whitepaper.
In the fast-paced world of technology, staying ahead of the curve is essential to remain competitive. The evolution of LED panel technology is no exception. Recently, our Ruby LED panels, running on Megapixel VR's HELIOS LED processing platform, underwent a significant upgrade, transitioning from a 1G connection to a cutting-edge 2.5G connection. This transformation has far-reaching implications for your technical workflow. In this blog, we'll delve into the details of this upgrade and explore how it can impact your LED panel setup.
VA Corporation unveiled its Virtual Production Studio VA STUDIO HANAM. Partnering with ROE Visual and ARK Ventures Inc South Korea, VA Corporation claims that this is the largest studio in Asia, where next-generation immersive content can be produced using virtual production technology.
The outdoor use of LED screens is still subject to myths and unawareness of possible risks. A persistent misunderstanding is the existence of blow-through LED panels. To cut things short, a transparent LED panel is not the same as a blow-through LED panel. Let's explain.