
Denali
创新融汇,碰撞出超绝表现力
Denali是雷迪奥视觉开创性的LED解决方案,重新定义卓越之名。Denali的设计,以超薄边框、0.78毫米点间距,和原生16:9分辨率为显著优势。Denali采用创新的Micro LED封装(MIP)技术,把对比度带到了新高度,让可视角进一步拓宽,保证给你留下深刻印象。
MIP技术 - 视觉性能的新标杆
下载Denali彩页
Denali主要特点
MIP技术
高黑区比
超广视角
原生16:9分辨率
低能耗
DL0.7
DL0.9
DL1.2
- Title
- Pixel Pitch
- LED Configuration
- Max Brightness Calibrated
- Panel Dimension
- Panel Resolution (H x V)
- Weight Per Panel
- Power Consumption Max/Average
- BTU Max/Average
- Transparency
- Serviceability
- Viewing Angle Vertical
- Viewing Angle Horizontal
- Refresh Rate
- Gray Scale
- Operational Temp/Humidity
- Storage Temp/Humidity
- IP Rating
- Certifications
- DL0.7
- 0.78mm
- MicroLED in Package
- 600nits
- 600mm x 337.5mm x 29.2mm
23.62” x 13.29” x 1.15” - 768 x 432
- 5.5kg | 12.13lbs
- 80W / 40W
- 275 / 130
- Solid
- Front
- 170°
- 170°
- 7680Hz
- 16bit
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP40
- CE, ETL, FCC, UKCA
- DL0.9
- 0.93mm
- MicroLED in Package
- 800nits
- 600mm x 337.5mm x 29.2mm
23.62” x 13.29” x 1.15” - 640 x 360
- 5.5kg | 12.13lbs
- 100W / 50W
- 345 / 160
- Solid
- Front
- 170°
- 170°
- 7680Hz
- 16bit
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP40
- CE, ETL, FCC, UKCA
- DL1.2
- 1.2mm
- MicroLED in Package
- 1000nits
- 600mm x 337.5mm x 29.2mm
23.62” x 13.29” x 1.15” - 480 x 270
- 5.5kg | 12.13lbs
- 100W / 50W
- 345 / 160
- Solid
- Front
- 170°
- 170°
- 7680Hz
- 16bit
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP40
- CE, ETL, FCC, UKCA
All specification values given are per panel. The specifications are for reference only, actual values may vary. The max. hanging amount is only valid when official ROE Visual hardware parts are used. The safety factor is 8. Climbing is only allowed if stated in the panel manual and only following the rules given therein. The max. stacking amount is only valid when official ROE Visual hardware parts are used and when sufficient ballast is applied – following the rules as stated in the panel manual and/or structural report.
