
Linx
The ROE Linx series are end-of-life
Downloads
Specs
Linx9
Linx12
Linx18
Linx25
- Title
- Pixel Pitch
- LED Configuration
- Max Brightness Calibrated
- Panel Dimension
- Panel Resolution (H x V)
- Weight Per Panel
- Power Consumption Max/Average
- BTU Max/Average
- Transparency
- Serviceability
- Viewing Angle Vertical
- Viewing Angle Horizontal
- Refresh Rate
- Gray Scale
- Scan Ratio
- Operational Temp/Humidity
- Storage Temp/Humidity
- IP Rating
- Certifications
- Max. Hanging
- Linx9
- 9.375mm
- SMD 3535 White
- 3500nits
- 300mm x 1200mm x 52mm
11.8” x 47.24” x 2.05” - 32 x 128
- 4.8kg | 10.58lbs
- 160W / 80W
- 546 / 251
- 18%
- 120°
- 140°
- 3840Hz
- 16bit
- 1/4
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP65
- ETL, TÜV
- 15 panels
- Linx12
- 12.5mm
- SMD 3535 White
- 3500nits
- 300mm x 1200mm x 52mm
11.8” x 47.24” x 2.05” - 24 x 96
- 4.7kg | 10.36lbs
- 160W / 80W
- 546 / 251
- 27%
- Rear
- 120°
- 140°
- 3840Hz
- 16bit
- 1/3
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP65
- CE, ETL
- 15 panels
- Linx18
- 18.75mm
- SMD 3535 White
- 3500nits
- 300mm x 1200mm x 52mm
11.8” x 47.24” x 2.05” - 16 x 64
- 3.6kg | 7.94lbs
- 160W / 80W
- 546 / 251
- 38%
- 120°
- 140°
- 3840Hz
- 16bit
- Static
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP65
- ETL, TÜV
- 15 panels
- Linx25
- 25mm
- SMD 3535 White
- 2500nits
- 300mm x 1200mm x 52mm
11.8” x 47.24” x 2.05” - 12 x 48
- 2.4kg | 5.29lbs
- 120W / 60W
- 409 / 188
- 52%
- Rear
- 120°
- 140°
- 3840Hz
- 16bit
- Static
- -20°C ~ 45°C, 10% ~ 90% RH
-4°F ~ 113°F, 10% ~ 90% RH - -40°C ~ 60°C, 10% ~ 90% RH
-40°F ~ 140°F, 10% ~ 90% RH - IP65
- CE, ETL
- 15 panels
All specification values given are per panel. The specifications are for reference only, actual values may vary. The max. hanging amount is only valid when official ROE Visual hardware parts are used. The safety factor is 8. Climbing is only allowed if stated in the panel manual and only following the rules given therein. The max. stacking amount is only valid when official ROE Visual hardware parts are used and when sufficient ballast is applied – following the rules as stated in the panel manual and/or structural report.
